How to remove limescale in the kettle – proven methods that work quickly
With the problem of how to remove limescale in the kettle, facing most Housewives, because of the salt deposits not only spoil the dish, but also can cause great harm to the body. There are lots of simple ways to solve the problem with the help of improvised home remedies.

Depending on the composition of water, one hostess never encountered such a nuisance, for others the problem of how to remove limescale in the kettle, always on the agenda. Why do I get scale in the kettle, whether it can harm, and how to get rid of it is that important to know.

Why the calcification in the kettle?

First, let’s talk about what scale, where does it come from, and why the question of how to remove limescale in the kettle, has relevance? Scale is a deposition of chemical elements, which are formed from a large number of salts, so if you use hard water, for you this problem will be particularly relevant. There is a residue according to this scheme:

  • in the process of heating water is the decomposition of bicarbonate of calcium and magnesium;
  • then formed is less soluble bicarbonates;
  • further precipitate is formed;
  • then the precipitate is concentrated on the inner surface of the kettle.

If the appearance of the resulting scale is not clean, your dishes will probably be spoiled a huge layer of sediments. Else you will face the fact that your Cup of tea will float a terrible lime flakes, therefore, timely cleaning of the kettle from scale at home necessary.

Harmful limescale in the kettle?

Another important reason why you need to remove limescale in the kettle is the harm to human health. There is much debate about the impact of scale on the condition, it is extremely difficult to determine the causes of certain diseases, especially those that are not immediate and are a consequence of the accumulation of harmful substances.

But if you consider the fact that by itself the consumption of hard water is harmful to the body, it becomes obvious that if the kettle in which you regularly boil water for tea or other drinks, there is an excessive amount of salt deposits, it may extremely devastating affect on your health. The result of drinking water from the dish with a scale can become problems such as:

  • gout;
  • stone formation in the urinary ways;
  • osteochondrosis;
  • tartar.

When one-time use of hard water from the kettle with a scale anything like this can not happen, but if you regularly drink such water, you can apply to your health irreparable harm, is it worth the risk? Therefore, you should know how to get scale in the kettle, the more it is a lot easier than it may seem.

How to clean the kettle from scale?

Looking for a kettle with a huge layer of salt deposits, sometimes it is hard to believe that this somehow possible to get rid of. Actually the problem is very easily solved, and for the removal of plaque even will not need to purchase corrosive chemicals. There are many simple and affordable for all recipes, how to remove limescale in the kettle household materials at hand, and they will not require a lot of effort and time.

How to clean the pot with citric acid descaling?

A way to clean the kettle from scale citric acid, is incredibly simple. We need to take about 500 ml of water and 1 large tablespoon of citric acid (instead of acid, you can use a fourth of a medium lemon, on the quality of the process is not affected). To start collecting water in the kettle, bring to a boil, then turn off, pour lemon juice or lay lemon and allow water to cool for approximately 1.5 – 2 hours.

If the kettle is not a very large scale layer, after this procedure, she will likely go by itself. But in order to remove the old RAID, will have to make an effort and have a good RUB. After this cleaning of the kettle you need to dial it in clean water and boiling water, only then you can again to use it.

How to clean the pot with Coca Cola from the scale?

Few people know that the famous all Cola is one of the most powerful tools from the scale. Before you clean the kettle from scale Cola, we need to buy a drink and prepare a wet kitchen sponges and toothbrushes.

  • Pour in a kettle of Cola, filled to approximately 2/3 of its volume.
  • Bring the drink to a boil.
  • Turn off the kettle and allow to cool about 30 minutes.
  • Next, pour a coke, and a large portion of the RAID has to pull away herself.
  • For the rest of the RAID uses sponges and brushes.
  • If after the procedure the plaque is left, we repeat it again.
  • The exact composition of Coca Cola, unfortunately, the manufacturer does not disclose, and the substance in it helps to cope with the scale in the kettle – phosphoric acid. So for safety before using the kettle after descaling, it should be very carefully washed, and boil clean water in it.

    Cleaning maker descaling vinegar

    There are two options for how to clean a kettle descaling with vinegar. For the first option, fill the kettle with water by about 2/3 volume, add a half Cup of 9% vinegar. Next, heat the water and boil for 30 minutes, and then pour the solution. If the procedure does not give results, the solution can not be poured out, and boiled again. If the plaque on the kettle is too big and stuffy, boiled vinegar solution, it is better not to drain immediately, and let it sit overnight. After that, all deposits should be removed easily.

    How to clean metal kettle from limescale?

    To remove limescale from the kettle, stainless steel is much easier than other cookware. The fact that stainless steel is very smooth on the back side, and a simple boiling water with vinegar or citric acid enough to make even the heaviest deposits themselves separated. Metal kettles often deposits are formed less residue remains in the majority in the form of floating flakes which are easily removed by simple rinsing.

    How to clean an enamel kettle from limescale?

    In an enamel bowl salt precipitation deposited is particularly strong, so the problem of how to clean the kettle from scale, in such cases, more relevant. Using the above methods, be prepared for the fact that one boiling will not help, and you will probably have to make an effort to remove plaque. For this you can use a kitchen sponge with a hard side, and one boiling, but several.

    Using enamel kettle, it is important to monitor scale deposition, and once you find it, remove it immediately. The fact is that too much lime layer damage the enamel ware, and even after a good cleaning of the bottom is rough to the touch and is likely to permanently darken.

    How to clean an electric kettle from limescale?

    Feature of electric kettles is that in the bottom of which is flat and smooth, and efficiently wipe it with a kitchen sponge sometimes impossible. And in the budget models inside it is curved and fragile heater that is very easy to damage. How to remove limescale in an electric kettle easily and efficiently? To do this, after boiling the above-described methods, it is advisable to use new and hard toothbrush. With its help you can easily clear the uneven surface and ten on all sides.

    The filter descaling the kettle – which is better?

    Even if your home has hard tap water, you can prevent this problem, and no amount of descaler in the kettle you will never need. There are measures of prevention of limescale in the kettle and other utensils. They are not cheap but they always save you from the problem of the emergence of harmful limescale. As prevention of scale formation, you can use kitchen filters, softening the water. They are of two types:

  • Flow-through filter. This system installs under the sink, it is designed for tap water of medium hardness. But even if you have very hard water, it can be used, just the cartridge will have to be changed more often.
  • Reverse osmosis system. By passing tap water through a special membrane, this filter 99% of it removes the excess salt and makes the water more pleasant to the taste and smell. But this system has one significant disadvantage – in the process of cleaning is complete demineralization of water.
  • When choosing a water purification system to prevent limescale, you need to pay attention to manufacturers such as:

    • Aquaphor;
    • Barrier;
    • Geyser.


     

    admin